GPU WORLD · GW-LC-CPU-INT-4710
Intel Xeon 6 LGA4710 cold plate
Tray and retention reviewEvaluate a cold plate for a Xeon 6 LGA4710-2 server. Match the processor SKU and tray revision before selecting the mount and coolant connection.
Fit and compatibility
- Intel lists Xeon 6 6500 and 6700 P-series processors and 6700 E-series processors on LGA4710-2. Verify the processor number and socket from the server documentation.
- Check the approved carrier and retention stack for that tray. Use a drawing that identifies the LGA4710-2 mounting points, package contact area and allowable load.
- Measure tray insertion clearance, connector access and the space required to remove memory without placing strain on the CPU fittings.
Scope of supply
- Define the LGA4710-2 plate, carrier or bracket, hardware and thermal interface material for the selected tray and each populated CPU.
- Specify hoses and connection hardware for the exact server loop. Include any routing supports and identify which parts remain with the tray during service.
Operating conditions
- Intel lists a 330 W TDP for the Xeon 6780E on FCLGA4710. Check the agreed power profile for the specific P-core or E-core CPU and the allowable inlet temperature and flow at that load.
- Use the installed routing and fitting losses to check available branch flow. Confirm that the proposed inlet temperature remains within the approved range across the site operating envelope.
Acceptance checks
- Confirm plate seating, retention and clearance with the fully assembled tray. Recheck connectors and hoses after an agreed tray service operation.
- Log processor temperature, power and throttle flags under sustained workload at the agreed coolant conditions. Record inlet temperature and flow with the results.
Technical references
Use these references to identify the platform and design requirements. GPU WORLD confirms the applicable assembly and operating conditions for each project.
CONFIGURATION & QUOTATIONSRequest a cooling quoteShare your server configuration and site conditions.Request a quote
Plan your cooling project
Our team will review server fit, heat rejection and the scope of supply.